General Information
Product Family InnoWave Series
Camera Model Vadzo InnoWave-2020MRS
Sensor
Sensor AR2020 CMOS Sensor from onsemi Hyperlux™ LP
Sensor Format 1/1.8"
Pixel Size 1.4 µm x 1.4 µm
Max Resolution 20MP - 5120(H) x 3840(V)
Shutter Rolling Shutter
Chroma Mono
Camera
Optics S Mount (M12 Standard)
Lens FOV Lens-dependent (varies by S-Mount lens selected)
Interface PoE (PoE 802.3af) and Dual Band Wifi (802.11a/b/g/n/ac)
GPIO Connector Yes Available*
Connector Standard RJ45 Ethernet Interface
Power Power over Ethernet (Compliance with PoE 802.3af standard 36 to 57V)
Operating Temperature -30⁰C to 70⁰C
Dimension Four Boards: 38mm (L) x 38mm (B)
Weight 35 Grams (Without Lens)
OS Supported Windows, Linux
Conformity OnVIF Compliant, RoHS 3, REACH
AR2020 Monochrome 20MP Ultra-Low-Light Dual-Interface (WiFi + GigE) Camera
InnoWave-2020MRS
Description :
The Vadzo InnoWave-2020MRS is a 20MP monochrome camera built on the onsemi AR2020, a stacked backside-illuminated CMOS sensor engineered for high resolution at industry-leading low power. As a monochrome sensor, it captures light without a color filter array, gathering more light per pixel than an equivalent color sensor for stronger sensitivity in low-light conditions, reinforced by enhanced NIR response at 850nm and 940nm. The sensor delivers full resolution capture at up to 60 fps in linear mode, with enhanced Dynamic Range (eDR) and Line-Interleaved HDR (LI-HDR) modes for challenging lighting, while Wake on Motion (WOM) and Super Low Power mode support efficient, always-ready operation at the edge. Dynamic ROI lets the camera output two independent regions of interest at once, so you can capture a wide overview and a zoomed-in detail from the same camera without streaming the full 20MP frame twice over your GigE or Wi-Fi connection. The camera supports both wired GigE and wireless Wi-Fi connectivity in a single unit, with seamless switching and fallback between the two, and GigE operating as the default when both are connected.
Core Benefits:
20MP onsemi AR2020 monochrome sensor with 1.4 µm stacked BSI pixel technology
Full resolution capture at up to 60 fps in linear mode
Enhanced Dynamic Range (eDR) and Line-Interleaved HDR (LI-HDR) modes for challenging lighting
Enhanced NIR response at 850nm and 940nm wavelengths for low-light and infrared imaging
Wake on Motion (WOM) and Super Low Power mode for efficient, always-ready operation
Dynamic ROI: dual independent regions of interest
Skipping, binning, and summing subsampling modes for flexible resolution and frame rate
Industry-leading low power consumption for extended, always-on deployments
Dual-Interface connectivity: GigE and Wifi with seamless switching and fallback
IN STOCK
(Will be available in 6 weeks)
Mentioned Price is Applicable for orders above 1k units
The shipment will be delivered in 2 to 3 weeks.
Price Details
UNIT PRICE
NOT INCLUSIVE
$458.00
Lens & Cable
QUANTITY
50 - 99
250+
$192.00
$219.00
Lens & Cable
Lens & Cable
100 - 249
Login to Download Datasheet
Datasheet
Download Initiated!
You can download again after 60 seconds.
CAD File
Download Initiated!
You can download again after 60 seconds.
Downloads
InnoWave-2020MRS
Camera can be customized to meet your needs.
Vadzo team shall be able to assist you with the details on this. Reach Vadzo Team for customization & quotation for bulk quantities.
Form Factor Modification & Board Redesigns.
Firmware Modifications to Incorporate Custom Features.
Design & Integration of NIR and Color LED Array Boards.
Design & Integration of Microphones & Speakers.
Design & Integration of Advanced Sensors: ToF, mmWave Radar, IMU.
Lens Holder Modifications & Electro-Mechanical Lens Filter Control.
Enclosure Design & Manufacturing: IP-Rated and Non IP-Rated.
Accessories



.webp)

.webp)
.webp)
.webp)
.webp)