Description :
The Vadzo InnoWave-2020MRS is a 20MP monochrome camera built on the onsemi AR2020, a stacked backside-illuminated CMOS sensor engineered for high resolution at industry-leading low power. As a monochrome sensor, it captures light without a color filter array, gathering more light per pixel than an equivalent color sensor for stronger sensitivity in low-light conditions, reinforced by enhanced NIR response at 850nm and 940nm. The sensor delivers full resolution capture at up to 60 fps in linear mode, with enhanced Dynamic Range (eDR) and Line-Interleaved HDR (LI-HDR) modes for challenging lighting, while Wake on Motion (WOM) and Super Low Power mode support efficient, always-ready operation at the edge. Dynamic ROI lets the camera output two independent regions of interest at once, so you can capture a wide overview and a zoomed-in detail from the same camera without streaming the full 20MP frame twice over your GigE or Wi-Fi connection. The camera supports both wired GigE and wireless Wi-Fi connectivity in a single unit, with seamless switching and fallback between the two, and GigE operating as the default when both are connected.
Core Benefits:
20MP onsemi AR2020 monochrome sensor with 1.4 µm stacked BSI pixel technology
Full resolution capture at up to 60 fps in linear mode
Enhanced Dynamic Range (eDR) and Line-Interleaved HDR (LI-HDR) modes for challenging lighting
Enhanced NIR response at 850nm and 940nm wavelengths for low-light and infrared imaging
Wake on Motion (WOM) and Super Low Power mode for efficient, always-ready operation
Dynamic ROI: dual independent regions of interest
Skipping, binning, and summing subsampling modes for flexible resolution and frame rate
Industry-leading low power consumption for extended, always-on deployments
Dual-Interface connectivity: GigE and Wifi with seamless switching and fallback
Applications:
Surveillance & Security
Machine Vision
Video Conferencing
3D & Stereo Imaging
Retail Analytics
Biometrics
Related Videos:
General Information
Product Family InnoWave Series
Camera Model Vadzo InnoWave-2020MRS
Sensor
Sensor AR2020 CMOS Sensor from onsemi Hyperlux™ LP
Sensor Format 1/1.8"
Pixel Size 1.4 µm x 1.4 µm
Max Resolution 20MP - 5120(H) x 3840(V)
Shutter Rolling Shutter
Chroma Mono
Camera
Optics S Mount (M12 Standard)
Lens FOV Lens-dependent (varies by S-Mount lens selected)
Interface PoE (PoE 802.3af) and Dual Band Wifi (802.11a/b/g/n/ac)
GPIO Connector Yes Available*
Connector Standard RJ45 Ethernet Interface
Power Power over Ethernet (Compliance with PoE 802.3af standard 36 to 57V)
Operating Temperature -30⁰C to 70⁰C
Dimension Four Boards: 38mm (L) x 38mm (B)
Weight 35 Grams (Without Lens)
OS Supported Windows, Linux
Conformity OnVIF Compliant, RoHS 3, REACH
Price Details
QUANTITY
UNIT PRICE
NOT INCLUSIVE
50 - 99
$458.00
Lens & Cable
100 - 249
$219.00
Lens & Cable
250+
$192.00
Lens & Cable
Login to Download Datasheet
Downloads
Datasheet
Download Initiated!
You can download again after 60 seconds.
CAD File
Download Initiated!
You can download again after 60 seconds.
InnoWave-2020MRS
Camera can be customized to meet your needs.
Vadzo team shall be able to assist you with the details on this. Reach Vadzo Team for customization & quotation for bulk quantities.
Form Factor Modification & Board Redesigns.
Firmware Modifications to Incorporate Custom Features.
Design & Integration of NIR and Color LED Array Boards.
Design & Integration of Microphones & Speakers.
Design & Integration of Advanced Sensors: ToF, mmWave Radar, IMU.
Lens Holder Modifications & Electro-Mechanical Lens Filter Control.
Enclosure Design & Manufacturing: IP-Rated and Non IP-Rated.
Experience Our Software Suite
Vadzo NXT is a software suite designed for seamless integration and control of GigE & Wi-Fi cameras. It provides precise camera configuration, real-time imaging adjustments, and firmware update management for Windows, and Linux platforms. The SDK ensures reliable performance with features like Region of Interest (ROI) configuration, Smart GPIO control, and fail-safe firmware updates.

Vadzo NXT Software
NXT SDK: GigE & Wi-Fi Camera Control and Integration
Vadzo NXT SDK enables real-time streaming, codec control, and onboard storage management for GigE and Wi-Fi cameras. It supports camera functions, SMART IO, and secure firmware updates with API integration.
Windows
Linux

What sensor powers the InnoWave-2020MRS?
The onsemi AR2020, a 20MP 1/1.8" stacked BSI CMOS sensor from the Hyperlux™ LP family, built for surveillance and low-light imaging.
What are the video formats supported by the camera?
Its 1.4 µm BSI pixels and enhanced NIR response at 850nm and 940nm extend sensitivity well beyond standard low-light performance.
Does the camera support HDR?
Yes, via enhanced Dynamic Range (eDR) and Line-Interleaved HDR (LI-HDR) modes, both processed on-sensor.
What is the shutter type, and does it affect motion capture?
An electronic rolling shutter with Global Reset Release (GRR), which resets all rows at once before reading them out, reducing some rolling-shutter artifacts without behaving like a true global shutter. Fast-moving subjects may still show mild skew compared to a dedicated global-shutter sensor.
Can this camera run continuously on limited power, like a solar or battery-powered installation?
Yes. It's built for the lowest power draw in its class, with Super Low Power (SLP) mode and Wake on Motion (WOM) for constrained-power deployments.
Does the InnoWave-2020MRS have both GigE and Wifi built in?
Yes. (Dual Interface) are integrated into the camera, with seamless switching and fallback between them, and GigE operating as the default when both are connected.
How is the camera powered?
Via PoE over the GigE connection. Wifi is used for connectivity, but the GigE cable must remain connected to supply power.
What are the video formats supported by the camera?
The (Dual Interface camera) InnoWave-2020MRS supports H.264 and H.265 video formats, letting you balance streaming quality against bandwidth depending on your network setup.
Does the camera support GPIO for external triggering?
Yes, GPIO for external trigger and synchronization is built in, useful for coordinating capture with other equipment.
Can I replace the lens on this camera?
Yes, the camera uses a standard S-Mount (M12) lens holder, so you can fit a different S-Mount lens to suit your installation. Lens changes may require additional tuning such as LSC or vignetting correction; contact Vadzo Support for guidance.

.webp)

.webp)
.webp)
.webp)
.webp)