AR2020 Bayer Raw 20MP MIPI CSI-2 Camera

Vadzo’s 20MP board-level MIPI CSI-2 camera module powered by the onsemi HyperLux™ LP AR2020 sensor (1/1.8", 1.4 µm BSI pixels) delivering 8-bit raw Bayer output for embedded vision platforms requiring direct sensor data access. Streams unprocessed high resolution Bayer data with sub-10ms latency, enabling custom ISP processing on SoC hardware accelerators, FPGAs, and edge AI platforms.

Four-lane MIPI CSI-2 interface provides direct streaming to host processor ISP for hardware-accelerated image processing. Supports Raspberry Pi 4/5, NVIDIA Jetson Orin NX/Nano/AGX, and NXP i.MX8M Plus.

Core Benefits

• 20MP onsemi HyperLux™ LP AR2020 sensor with 1.4 µm BSI pixel

• 8-bit Bayer raw output - direct sensor data access

• Sub-10ms latency for real-time processing

• Custom ISP pipeline on SoC hardware accelerators

• 100 dB line-interleaved HDR for extreme dynamic range

• Enhanced NIR response at 850nm and 940nm wavelengths

• Super Low Power Mode (SLP) for power hungry applications

• Electronic Rolling Shutter (ERS) and Global Reset Release (GRR) Modes Supported

• Direct SoC integration via 4-lane MIPI CSI-2 - no USB overhead

• Sub-10ms latency for real-time vision processing

• Smart ROI dynamic streaming for accelerated AI inference

• Wake-on-Motion for intelligent power management

• Flexible subsampling: up to 240 fps at VGA

• Pre-validated drivers: Raspberry Pi, Jetson Orin, NXP i.MX8M+

• Compact 38mm × 38mm board-level footprint