Vadzo InnoWave GigE Wi-Fi Camera Series
Most network imaging projects force an early decision between a cable that never drops and a wireless link that goes anywhere. The Vadzo InnoWave series removes that choice by placing both connections on a single solution. Each InnoWave GigE Wi-Fi camera carries a Gigabit Ethernet port and an integrated Wi-Fi module with a built-in chip antenna. Engineers can run the unit on a wired line at a fixed inspection station, then move the same hardware to a mobile platform without changing the imaging setup. For building smart factories and service robots and remote monitoring systems, that flexibility shortens development time and keeps the hardware list short.
InnoWave Series: One Module with Two Network Paths
The InnoWave series brings together two proven Vadzo product lines. The Innova GigE camera series contributes stable Gigabit Ethernet streaming over long cable runs along with ONVIF compliance for standard NVR and VMS software. The Wave series contributes to wireless streaming for installations where routing a cable is costly or simply impossible. The result is a GigE and Wi-Fi camera that behaves as one network device no matter which link is active. Current InnoWave models cover 20MP, 13MP, and 8MP resolutions on onsemi sensors, so a project can pick up detail level first and keep the same dual interface design across every option.
Dual Interface Design: How GigE and Wi-Fi Work Together
Inside every GigE Wi-Fi camera in the InnoWave lineup, the two interfaces share a single image pipeline. When an Ethernet cable is connected, the module streams over GigE by default to deliver low-latency, high-bandwidth video. If the cable is removed or the wired link fails, the camera falls back to Wi-Fi and the video keeps moving. This automatic switching is what separates a true Gigabit Wi-Fi camera from a wireless unit with a basic wired port added as an afterthought. It also makes InnoWave a practical wireless GigE camera for robotic arms with rotating joints where a cable would twist or wear out over time.
Sensor Options Across the InnoWave Portfolio
The sensor inside each module decides how the camera handles light, motion, and fine detail. At the top of the range, the 20MP onsemi AR2020 sensor is tuned for ultra-low-light scenes such as dim warehouses and night-time yards. Its color version reproduces natural tones for inspection work, while its monochrome version collects more usable light per pixel for low-contrast scenes. The 13MP onsemi AR1335 sensor offers a strong balance of resolution and frame rate for general embedded vision tasks. For projects that need 4K class details at a lower data rate, the 8MP onsemi AR0821 color sensor delivers clear and natural images for surveillance and inspection work. Every option in the series works as a Gigabit Ethernet Wi-Fi camera with the same interface behavior, so moving between resolutions does not mean rewriting network code.
Best Suited Applications for Wired and Wireless Deployment
A dual interface design pays off wherever a vision system needs to move, or wherever cabling is hard to maintain. In industrial automation, an InnoWave module can stay wired on a production line during normal operation and still report over Wi-Fi when a line is reconfigured. Autonomous mobile robots and AGVs rely on the wireless link while they travel and use GigE at docking stations for bulk image upload. Smart city and traffic monitoring projects benefit from fast installation on poles and gantries. Retail analytics, kiosks, and logistics hubs use the same hardware to cover both fixed and temporary viewpoints. Medical carts and laboratory equipment that move between rooms also gain from a camera that never loses its feed when it leaves the cable behind.
Why Choose Vadzo Imaging for Your Next Network Camera Project
Vadzo Imaging designs and manufactures embedded camera products for OEMs and system integrators. Our engineers validate each sensor and interface pairing on real hardware before releasing and offer customization for lens choice, enclosure, and firmware when a standard module does not fit. Start with a single interface can explore our broader camera portfolio through the Vadzo sitemap and move to InnoWave when a project grows. Direct support from the people who build the hardware is what keeps projects on schedule. Learn more about our full range at Vadzo Imaging.
Vadzo InnoWave Camera Modules
Browse the InnoWave lineup below to find the right resolution and sensor for your Wi-Fi and GigE dual interface platform.
Quick Samples Dispatch
Find the Right Camera for Your Project Today.
Samples procured typically ship within 5-7 business days of order confirmation, with tracked international shipping. Compressed development timeline? You can be capturing frames from a Vadzo camera the same week you shortlist it.
RoHS 3 · REACH · NDAA (Selected Models)
No MOQ (Minimum Order Quantity)
Ships Worldwide
Frequently Asked Questions
1) What are the key benefits of using an embedded GigE Wi-Fi camera in industrial automation?
The key benefits are uptime and layout freedom. A GigE Wi-Fi camera keeps streaming when a cable is unplugged or damaged because it falls back to Wi-Fi automatically. It supports long wired runs for fixed stations and wireless operation for equipment that moves. Plants can also reposition inspection points without pulling new cable and ONVIF compliance lets the module join existing NVR and VMS software.
2) How do I integrate a wireless GigE camera into a custom robotics platform?
Start by mounting the wireless GigE camera and connecting its GigE port to the robot controller for initial setup and lens focusing. Next, configure the Wi-Fi network so the camera can stream while the robot moves or while an arm rotates through its joints. The controller then discovers the camera as a standard network device and pulls video into the vision software. The GPIO connector can link capture to motion events. Vadzo engineers can help with lens, firmware, and mounting questions during integration.
3) How does a Gigabit Wi-Fi camera switch between wired and wireless connections?
A Gigabit Wi-Fi camera such as the InnoWave series uses GigE as the default link whenever an Ethernet cable is connected. If that link drops, the module moves to Wi-Fi on its own and keeps the video stream running. Once the cable returns, the camera goes back to GigE for maximum bandwidth and the lowest latency.
4) What are the advantages of a GigE and Wi-Fi dual interface camera?
A dual interface camera provides flexible connectivity, reliable video transmission, and easier system deployment. It allows engineers to use Ethernet for stable wired streaming and Wi-Fi for wireless operation without requiring separate camera hardware.
5) Which industries use dual interface GigE and Wi-Fi camera modules?
Industrial automation and robotics, and smart city monitoring are the most common for users along with logistics and retail analytics, and medical equipment. Each of these fields needs video that stays connected whether a camera is fixed or moving. Ready to choose the right module for your project Visit vadzoimaging.com
