top of page

Raspberry Pi Global Shutter Camera: Specs, Uses, Verdict

1 day ago
5 min read

The Raspberry Pi Global Shutter Camera is a 1.6-megapixel camera module built around the Sony IMX296 sensor. It exposes every pixel at the same instant, so fast-moving objects stay straight instead of bending or wobbling like they do on a rolling shutter camera. It launched at $50 without a lens and works with any Raspberry Pi that has a CSI connector. It is worth buying if you need clean motion capture or machine vision input, and not worth it if you need high resolution.


This article covers why a global shutter matters, what the specs mean in practice, and how to connect and test the camera, including on a Raspberry Pi 5. It also covers where the camera falls short and which other global shutter cameras fit when it does.


Vadzo Imaging designs MIPI CSI-2 global shutter modules for platforms such as Raspberry Pi 4 and 5 and NVIDIA Jetson. The comparison near the end uses real figures from both sides.


Why a global shutter camera matters on a Raspberry Pi


A global shutter matters because it removes the geometric distortion that rolling shutter adds to moving subjects. A rolling shutter sensor reads its rows one after another, so a fast object sits in a slightly different place in the top row than in the bottom row. A global shutter sensor exposes all rows together.


What rolling shutter does to your images


Rolling shutter turns straight lines into slanted or wobbly ones. In side-by-side panning tests against the 12MP High Quality Camera, a vertical object looked tilted on the rolling shutter frame and stayed upright on the Global Shutter Camera. Motion blur remained in both, because blur depends on exposure time, not shutter type.



A global shutter fixes distorted shapes, not blur. Short exposures fix blur.

Where it pays off


The benefit shows up wherever software measures shapes or positions in a moving scene:


  • Machine vision: inference models and measurement code get undistorted geometry, which matters more than pixel count.

  • Conveyor and part inspection: items keep their true shape as they pass the lens.

  • Spinning objects: fans, propellers and wheels no longer bend.

  • Robots and vehicles: camera motion no longer skews the frame.

  • High-speed photography: very short exposures freeze motion when you add enough light.


Raspberry Pi Global Shutter Camera specs


The camera pairs a 1.6MP Sony IMX296 sensor with large 3.45 µm pixels and the same C/CS lens mount as the High Quality Camera. Large pixels collect more light, which is what lets it run very short exposures.


Core specifications


Spec

Value

Sensor

Sony IMX296LQR-C, colour

Resolution

1.58 MP, video up to 1456 × 1088 at 60 fps

Pixel size

3.45 µm × 3.45 µm

Shortest exposure

As low as 30 µs with adequate lighting

Output

RAW10

Lens mount

C and CS (C-CS adapter included)

Back focus

Adjustable, 12.5 to 22.4 mm

IR cut filter

Integrated

Size and weight

38 × 38 × 19.8 mm, 34 g

In the box

C-CS adapter, screwdriver, 150 mm ribbon cable

Tripod mount

1/4"-20

Availability

In production until at least January 2032


What the numbers mean in practice


Consider a part moving at 2 m/s on a conveyor. At a 100 µs exposure it travels 0.2 mm during the exposure, and at 30 µs only 0.06 mm. That is sharp enough to read small features. The 30 µs figure only works with strong lighting, so plan on a light source and not on ambient room light.



The 60 fps ceiling at full resolution is enough for most inspection and tracking jobs. The low pixel count is a deliberate tradeoff, because full-resolution frames from a 12MP sensor are hard to process in real time.


How to connect and use it with a Raspberry Pi


Plug the ribbon cable into the CSI port with the Pi powered off, update Raspberry Pi OS, and run a preview command. The IMX296 driver has been in the Raspberry Pi kernel since 2022, so no manual driver install is needed on a current image.


Connect and test


Follow these steps:


  1. Shut the Pi down and unplug power.

  2. Lift the CSI connector latch, seat the cable fully, and close the latch.

  3. Boot, then update the system.

  4. List the camera, preview it, and capture a still.


sudo apt update && sudo apt full-upgrade -y rpicam-hello --list-cameras rpicam-hello -t 0 rpicam-still -o test.jpg


On older images the same tools are named libcamera-hello and libcamera-still. If the camera does not show up in the list, reseat the cable first. Most failures are loose or reversed ribbons.


If the camera is missing from the list, reseat the ribbon cable before you touch software.

Lens, Pi 5, Zero and trigger notes


No lens is included. Keep the C-CS adapter on for C-mount lenses and remove it for CS-mount lenses, then choose focal length by field of view and working distance.


The Raspberry Pi 5 uses smaller 22-pin camera connectors, so you need a 15-to-22-pin adapter cable. Every Pi Zero model needs a Pi Zero camera cable instead of the standard one.


The black rear cover also changes mounting. Plates with short standoffs may need taller ones. External triggering is possible, but it needs a small hardware change described in Raspberry Pi's camera documentation.


Is the Raspberry Pi Global Shutter Camera worth buying?


It is worth buying if you need distortion-free motion capture at modest resolution and accept paying separately for a lens. The camera launched at $50, the same price as the High Quality Camera. Check current prices with Approved Resellers, and budget for a lens on top.


Strengths and limits


Strengths

Limits

Low launch price

Only 1.6MP

Works with C and CS lenses

No autofocus

Driver support in Raspberry Pi OS

C-mount lenses add bulk

Short exposures from large pixels

Rear cover affects mounting plates

Long production commitment

External trigger needs hardware changes


Who should buy it


Buy it for learning machine vision, prototyping inspection setups, or capturing fast, well-lit motion on a Pi. Skip it if you need wide-angle detail, large prints, or a compact fixed lens.


Buy it for geometry and speed. Look elsewhere for resolution.

Other global shutter cameras for Raspberry Pi


If the 1.6MP ceiling or the C-mount lens bulk is a problem, other MIPI global shutter modules fit better. Vadzo's Bolt-235CGS is one. It is a 2.3MP colour global shutter camera on an onsemi AR0235 sensor with an M12 lens mount. It is aimed at OEM designs that move from prototype to volume.



Side-by-side comparison


Spec

Raspberry Pi Global Shutter

Vadzo Bolt-235CGS

Sensor

Sony IMX296

onsemi AR0235

Max resolution

1456 × 1088

1920 × 1200

Pixel size

3.45 µm

2.8 µm

Frame rate

Up to 60 fps at full resolution

Up to 120 fps (1080p, 720p, VGA)

Lens mount

C/CS

S-mount (M12)

Interface

MIPI CSI-2

2-lane and 4-lane MIPI CSI-2

Board size

38 × 38 × 19.8 mm

38 × 38 mm, convertible to 32 × 32 mm

Weight

34 g

13 g without lens

Price

$50 at launch, lens extra

From $202


Which one fits


The Raspberry Pi camera wins on price and larger pixels. The Bolt-235CGS wins on resolution, size and weight, which matter inside drones, robots and enclosures.


Vadzo lists Raspberry Pi 4 and 5 driver support for its MIPI cameras, so confirm your exact model and OS image before ordering. Volume pricing runs from $198 per unit at 50 to 99 pieces down to $135 at 250 or more, excluding lens and cable. There is no minimum order quantity.


Pick the Pi camera to prototype cheaply. Pick an OEM module when size, resolution or supply matter.

Should you get one?


The Raspberry Pi Global Shutter Camera does one job well. It captures fast motion without rolling shutter distortion, at a price a hobbyist or prototyping team can afford. Accept the 1.6MP limit, add a lens and good lighting, and it delivers clean input for machine vision.


If your project outgrows it, because you need more resolution, a smaller body or volume supply, Vadzo's global shutter MIPI cameras are the next place to look, with engineers available to help you choose.

 
 

Reach Vadzo Team for the Customization

Vadzo team shall be able to assist you with the details on this.

contact form camera image
bottom of page